Galvanized Steel Sheets and Coils
Galvanized Steel Sheets and Coils
Material Types for Galvanized Steel Sheets and Coils
There are many types of galvanized coil and sheet steel in the market. each type of them have its own benefits and its own usages.
Our Steel division provides you with any type you need in your market, also we can supply any amount of galvanized steel and coil.
Please find below the main types of the galvanized coil and sheet steel:
- Commercial Steel (CS Types A, B, and C)
- Forming Steel (FS Types A and B)
- Deep Drawing Steel (DDS Types A and C)
- Extra Deep Drawing Steel (EDDS)
- Structural Steel (SS) – further designated by Grades (33,37,40,50,80)
- High Strength Low Alloy Steel (HSLAS)
The galvanized steel depends on the Zinc element of his process of production.
A zinc coating is one of the most accurate and economical elements of protecting bare steel from a rust environment.
The zinc element not only serves as a border between the steel and the environment, it will also damage itself to protect the underlying steel sheet.
Sacrificial or galvanic protection occurs when two dissimilar metals are in contact and coupled with water and oxygen, zinc corrodes preferentially to the iron in steel.
This protection prevents corrosion of the steel at areas not covered with the material of the zinc, Thus the spread of corrosion from cut edges, drill holes, etc is minimized also to reach the best shape at the end of the production process.
There are many applications for the galvanized steel and coil as we are in the globalization era, many societies now a days are moving towards the process of development and the galvanized steel is main element in this process of development now a days.
These are some of the applications of the galvanized coils and steel:
- Exterior building products
- Ductwork
- HVAC products
- Flashing
- Electrical boxes and other electrical products
- Roofing
- Doors
- Sashes
Specifications
Product Name | Galvanized Steel Sheets |
Zinc Coating | 20-120 g/m² |
Thickness | 0,14-1,0 mm |
Width | 600-1250 mm |
Length | Custom |
Thickness Tolerance | + 0/-0,001 |
Width Tolerance | + /-0,006 |
Length Tolerance | + /-0,06 |
Surface Structure | Mini Bag Spangle |
Surface Treatment | Anti-Finger printing, Chromated, oiled/ non-oiled |
Package | Standard export package (Detailed picture is as follows) |
Finish | Galvanized |
Product Name | Galvanized Steel Coil |
Material | CGCC, DX51D, Q195, Q235 |
Grade | SGCC, DX51D+Z |
Zinc Coating | 20-120 g/m2 |
Thickness | 0,13-0,8 mm |
Width | 600-1250 mm |
Coil ID | 508/610 mm |
Coil weight | 3-8 tons |
Surface Structure | Mini/ Big Spangle |
Surface Treatment | Anti-Finger printing, Chromated, oiled/ non-oiled |
Package | Standard export package (Detailed picture is as follows) |
Hardness | Soft (normal), hard, full hard (G300 – G550) |